Gorilla glues are strong adhesives you can use to attach wood together to make furniture or anything else. It is quite helpful for large wood projects. If you spill excess glue or want to clean the residues, you may ask, how to remove gorilla glue from wood?
The solution to remove gorilla glue from wood depends on the condition of the glue, i.e., whether the glue is dry or wet. Plus, you also need to consider the type of wood surface. For example, you can use acetone to remove wet gorilla glue.
Then again, you can follow different methods for removing dried gorilla glue from wood. Let’s discuss the 8 best ways to solve the gorilla gluing problem.
Does Gorilla Glue come off wood?
Gorilla glues are pretty tough to clean. That’s why many people ask if it is really possible to remove gorilla glue.
The good news is that gorilla glues come off fine if you know how to do it properly. You need to be careful with the methods you use.
For example, if you use razor blades on paint thinner on painted wood, it may also remove a little bit of paint.
How to remove gorilla glue from wood – 8 methods?
There are several ways to remove gorilla glue or super glue from wood. Find the one that is easy for you and also fits your problem.
Here are the top 8 methods (with step-by-step process) to remove gorilla glue from wood:
Method 1: Wipe with Acetone
Acetone is a liquid solvent that you can use to remove gorilla glue when it is still wet. If you spill excess glue on wood, you need to act fast with acetone. It’s easier to remove gorilla glue when it is wet. You also can use nail polish remover as that includes acetone or a similar solvent.
4 steps to remove wet gorilla glue with acetone
- Step 1: Wipe away as much fresh gorilla glue spills as you can with a paper towel.
- Step 2: Dampen another paper towel into acetone or the nail polish remover without completely drenching it.
- Step 3: Start wiping the rest of the gorilla glue with the dampened towel. Put a little bit of pressure if necessary.
- Step 4: If any glue is left at the end, scrape away using a putty knife.
Method 2: Sand off the glue
How to remove dried gorilla glue from wood? If you need to remove a large amount of dried gorilla glue from wood, you can use a paint scraper and sand blocks. You also can use a chisel instead of a paint scraper.
Sand blocks have so many uses, and you may already have one at home. If not, you can pick one from the general store or get the Warner Sanding Block from the online store.
3 steps to sand off dried gorilla glue from wood:
- Step 1: Chip off the gorilla glue using the paint scraper or the chisel.
- Step 2: Sand off the remaining glue using a sand block.
- Step 3: Clean the sanding dust off the surface with a paper towel.
Method 3: Using Razor blades
You can use a razor blade to remove dried gorilla glue from wood. Don’t use it if the work is painted, as this process can peel off the paint too.
Follow the steps below to get rid of dried gorilla glue with razor blades:
3 steps to eliminate dried gorilla glue:
- Step 1: Hold the blade flat against the wood surface.
- Step 2: Push it forward and cut through the glue to peel them off.
- Step 3: Clean up the residues using sandpaper.
Know more here: Removing Dried Gorilla Glue From Your Wood Project (video)
Method 4: Applying Paint thinner
Paint thinners are mainly for washing off excess paint from any surface. But you also can use this product to remove gorilla glue from wood.
You can use the Sunnyside Odorless Paint Thinner, which doesn’t cost much. Do not use paint thinner on painted wood, or you will need to repaint.
4 steps to remove gorilla glue from wood with a paint thinner:
- Step 1: Wear gloves for safety and open the windows for ventilation.
- Step 2: Spill a small amount of paint thinner on a clean cloth.
- Step 3: Start rubbing the glue on the wet side.
- Step 4: Use more paint thinner if necessary and clean the residues with water damp cloth.
Method 5: Using Mineral spirits
Mineral spirits are petroleum-based solvent that doesn’t include any harmful paint stripper chemicals.
It could be one of the products to remove gorilla glue even from painted wood. But how to remove gorilla glue from painted wood using Mineral spirits?
Following are some step-by-step processes you can try for the process:
5 steps to remove gorilla glue using mineral spirits:
- Step 1: Wear goggles and gloves for safety.
- Step 2: Add a few drops of mineral spirits to a dry cloth.
- Step 3: Put the wet side on the gorilla glue.
- Step 4: Let the cloth sit on the glue for five minutes.
- Step 5: Start rubbing the glue until all the glue comes off.
Method 6: Using Soda & vinegar
If you don’t have much time to go to the store or want to save money, you can use home remedies. Soda and vinegar have some components that work great against sticky items.
But how to prepare a solution with soda and vinegar to remove gorilla glue from wood? Let’s check out the following steps.
4 steps to remove gorilla glue from wood using soda and vinegar:
- Step 1: Mix equal amounts of baking soda and distilled vinegar in a glass or bowl.
- Step 2: Spread the paste over the gorilla glue and let it sit for an hour.
- Step 3: Rub the surface with a toothbrush after one hour to remove all the gorilla glue.
- Step 4: Clean the wood surface with a wet cloth to remove the glue residues.
Method 7: using Goo gone
If you have a question in your mind about how to remove gorilla glue from wood furniture, then don’t be worried. Perhaps Goo Gone could be an excellent product for removing adhesives from painted wood or furniture.
You can get the Goo Gone Pro-Power, which is completely safe to use on different surfaces such as tiles, carpets, and finished wood.
Follow the steps below to remove gorilla glue from painted wood using the Goo gone:
3 Steps to remove gorilla glue by using the Goo gone:
- Step 1: Spray or pour some goo gone on the gorilla glue.
- Step 2: Let it melt the glue for twenty to thirty minutes.
- Step 3: Scrub off the gorilla glue with a cloth dampened with hot water.
Watch this video: Will Goo Gone remove Gorilla Glue?
Method 8: Remove gorilla glue by using Nitromethane
Nitromethane is one of the most effective components for removing gorilla glue from wood. It is specifically made to peel off glues. You can find nitromethane in any craft store.
3 steps to remove gorilla glue using nitromethane:
- Step 1: Pour a few drops of nitromethane on the glue.
- Step 2: Let the nitromethane set for ten minutes.
- Step 3: Scrub off the glue and residues using a rag.
Conclusion
Did you find a convenient solution on how to remove gorilla glue from wood from the above list? Depending on the type of gorilla glue condition you are dealing with, the solution may vary. Share this article with your friends telling your experience of removing gorilla glue from wood.
